12″ Nail Puller – Jackaroo
12″ Nail Puller – Jackaroo
- The Jackaroo nail puller is used to pull nails from the horseshoe and hoof.
- The length of this tool assists in leverage.
- The jaws are designed to lock over the horseshoe nail head and along its taper to easily remove a single nail from a creased, swedged, or fullered horseshoe.
14″ Pull Off – Jackaroo
14″ Pull Off – Jackaroo
Jackaroo 14″ Horseshoe pull-off tool.
- A standard horseshoe puller gives great leverage to remove up to standard-size horse horseshoes.
- Jackaroo farrier tools are of great quality, at a great price.
Bellota Top Sharp Rasp
Bellota Top Sharp Rasp
The Bellota Top Sharp Rasp gives exceptional cutting performance, on the rasp side
and a coarse design on the file side
FEATURES
Moderately coarse file side
High grade steel
Heat treated to hold edge
Rasp tooth designed for smooth precise cutting
Clinch Cutter – Mustad
Clinch Cutter – Mustad
The Mustad Clinch Cutter is designed to be used to open nail clinches, ensuring that the nail can be pulled from the hoof without damaging the hoof wall.
one size
Clinch Cutter/Buffer
Clinch Cutter/Buffer
- Drop forged from high quality tool steel
- Pritchel for cleaning and sizing nail holes on opposite side
- Solid heads & large striking surface
- Double-beveled for ambidextrous use
- Flat surface for easy, close cutting
Clincher – Mustad
Clincher – Mustad
The Mustad Clincher is a well balanced clincher, designede with a comfort grip. It is appropriate for a variety of nailing heights.
A clincher is used to tighten the nail after it has been cut to length. An added tooth makes it easier to clinch the higher driven nail. The balance between the length of the handles and the construction of the jaws makes it easy to bend the nail and drive it into the hoof wall.
Our clinchers are made of the highest quality tool steel for durability and sharpness.
12″
Driving Hammer – Jackaroo
Driving Hammer – Jackaroo
The Jackaroo Driving Hammer has a beautifully balanced head made of the highest grade tool steel and is heavily hand-polished. It is a compact solid mass that can deliver the blow to the intended target without itself deforming. The opposite or back side has a claw for pulling or prying out nails.
About This Item:
- Easy to Use
- Drive nails with minimal effort
- Forged from high-quality steel with a hardwood handle
- The most helpful farrier hammer available
- Hardwood handle
Driving Hammer – Mustad
Driving Hammer – Mustad
The Mustad Driving Hammer is available in 300g (can be ordered in – 355g or 470g).
A fine and well-balanced hammer, the Mustad Driving Hammer comes with an angled nailing surface for the best possible working position. The round, slightly curved head of the Mustad Driving Hammer increases the power when driving nails. When a nail is not completely driven in, the finely detailed claw of the Mustad Driving Hammer helps remove it easily. The handle is made of Hickory for the best possible strength and is large enough to be shaped to an individual hand size. The Mustad Driving Hammer can be used to drive, cut and clinch nails.
The head of the Mustad Driving Hammer is made from the highest quality tool steel and then tempered to the correct hardness for prolonged durability.
Always wear safety glasses when using a hammer.
300g
FD Ascot Hoof Knife – RH
FD Ascot Hoof Knife – RH
FD Ascot Hoof Knives available with a narrow blade or wide blade and are Right Hand knives.
F. DICK Hoof knives are produced and controlled according to many years of experience in producing tools. They are characterized by a long working life and top raw materials. Producing a hoof knife requires more than 20 single workflows. Many of these steps, such as sharpening, polishing and fixing the handle, are made by hand and are carried out in our production sites in Germany. Besides quality controls during the production, all our Dick products are subject to a strict final quality control before they leave our production facilities.
Made of high-quality special carbon steel. Short STRAIGHT blade, polished, with sharp cutting edge geometry for prolonged performance.
The ergonomic rosewood handle in combination with the shape of the blade ensures the best dynamic effect.
FLYGON GOLD Spray
FLYGON GOLD Spray
Insecticidal and repellent spray to repel flies, mosquitoes & nuisance insects.
Forging Hammer Mustad
Forging Tongs – Mustad
Forging Tongs – Mustad
A forging tong designed for perfect grip, stability, and safety.
By milling the jaws to the correct dimensions, 8 (5/16″) and 10 (3/8″) millimeters, a parallel hold is obtained. The handles have been designed to keep the material in place with as little effort as possible. Forging tongs are made of the most suitable tool steel and dimensioned for the highest durability, and, like all Mustad tools, they have a full guarantee against manufacturing defects.
8mm
GDM Farrier Knife – Mustad
GDM Farrier Knife – Mustad
Mustad GDM Knife Curved Blade is made from superior material.
It has an ergonomic handle for maximum precision and leverage.
Curved Blade
In a collaboration between Mustad and Grant Moon, we have teamed up to create a distinctive line of farrier tools, paying attention to the smallest details and materials to give the maximum performance and reliability. Made in Italy.
GE Forge EZ Nipper 15″
GE Forge EZ Nipper 15″
G.E. Forge & Tool’s Hoof Nippers combine durability with maximum wear resistance. The blades are aligned and sharpened by G.E. professionals, delivering a precision nip time after time. They are available in four sizes to suit each farrier’s needs.
Ergonomic Handle
The EZ Nipper™ handles have a flat, oval shape, which eliminates sharp edges. This design provides more comfort, and reduces hand fatigue.
Increased Leverage
With slightly more leverage than the Classic Nippers™, the EZ Nipper™ decreases the effort needed in the hoof trimming process.
15″
